263 research outputs found
A unifying framework for seed sensitivity and its application to subset seeds
We propose a general approach to compute the seed sensitivity, that can be
applied to different definitions of seeds. It treats separately three
components of the seed sensitivity problem -- a set of target alignments, an
associated probability distribution, and a seed model -- that are specified by
distinct finite automata. The approach is then applied to a new concept of
subset seeds for which we propose an efficient automaton construction.
Experimental results confirm that sensitive subset seeds can be efficiently
designed using our approach, and can then be used in similarity search
producing better results than ordinary spaced seeds
Summer pruning effect on tree growth and fruit production of persimmon
This paper reviews the effect of summer pruning in persimmon (Diospyros kaki Thunb.) with regard to its positive and negative aspects on tree growth and fruit production. In order for this practice to be of a significant value, a clear understanding is needed to appreciate the fact that so many variables are involved and much remains to be substantiated. Major reasons for summer pruning of persimmon are to improve fruit quality by enhancing light penetration into the tree canopy and to restrict vegetative shoot growth. Summer pruning generally suppresses tree growth even though it elevates leaf activity. Positive effects of summer pruning on skin color, soluble solids, and appearance of fruits are observed mainly in those orchards where the trees are heavily dormant-pruned to lower tree height and to secure space in high density plantings. Secondary shoot pruning and topping could also improve fruit quality, increasing flower bud formation of remaining shoots. Summer-pruning effects are highly dependent on its severity and timing to affect tree growth, shoot regrowth, reserve accumulation, and fruit quality
Ultrafast carrier relaxation in GaN, In_(0.05)Ga_(0.95)N and an In_(0.05)Ga_(0.95)/In_(0.15)Ga_(0.85)N Multiple Quantum Well
Room temperature, wavelength non-degenerate ultrafast pump/probe measurements
were performed on GaN and InGaN epilayers and an InGaN multiple quantum well
structure. Carrier relaxation dynamics were investigated as a function of
excitation wavelength and intensity. Spectrally-resolved sub-picosecond
relaxation due to carrier redistribution and QW capture was found to depend
sensitively on the wavelength of pump excitation. Moreover, for pump
intensities above a threshold of 100 microJ/cm2, all samples demonstrated an
additional emission feature arising from stimulated emission (SE). SE is
evidenced as accelerated relaxation (< 10 ps) in the pump-probe data,
fundamentally altering the re-distribution of carriers. Once SE and carrier
redistribution is completed, a slower relaxation of up to 1 ns for GaN and
InGaN epilayers, and 660 ps for the MQW sample, indicates carrier recombination
through spontaneous emission.Comment: submitted to Phys. Rev.
Multiband model for penetration depth in MgB2
The results of first principles calculations of the electronic structure and
the electron-phonon interaction in MgB2 are used to study theoretically the
temperature dependence and anisotropy of the magnetic field penetration depth.
The effects of impurity scattering are essential for a proper description of
the experimental results. We compare our results with experimental data and we
argue that the two-band model describes the data rather well.Comment: submitted to Phys. Rev.
Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments
Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made
available as an electronic reprint with the permission of ASM International. One print or electronic copy may
be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via
electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or
modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor
Experimental evidence of two-band behavior of MgB2
The break-junction tunneling has been systematically investigated in MgB2.
Two types of the break-junction contacts have been exploited on the same
samples, which demonstrated tunnel contact like (SIS) and point contact like
(SnS) behavior. Both of them have shown the existence of the two distinct
energy gaps. We have observed also the peculiarities on the I(V)-
characteristics related to Leggett's collective mode assisted tunneling. -->
Corresponding author address: [email protected]: 14 pages, 6 figures, 1 table; corrected typos and fig
Task swapping networks in distributed systems
In this paper we propose task swapping networks for task reassignments by
using task swappings in distributed systems. Some classes of task reassignments
are achieved by using iterative local task swappings between software agents in
distributed systems. We use group-theoretic methods to find a minimum-length
sequence of adjacent task swappings needed from a source task assignment to a
target task assignment in a task swapping network of several well-known
topologies.Comment: This is a preprint of a paper whose final and definite form is
published in: Int. J. Comput. Math. 90 (2013), 2221-2243 (DOI:
10.1080/00207160.2013.772985
Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector
This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be:
σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb,
where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented
Search for strong gravity in multijet final states produced in pp collisions at √s=13 TeV using the ATLAS detector at the LHC
A search is conducted for new physics in multijet final states using 3.6 inverse femtobarns of data from proton-proton collisions at √s = 13TeV taken at the CERN Large Hadron Collider with the ATLAS detector. Events are selected containing at least three jets with scalar sum of jet transverse momenta (HT) greater than 1TeV. No excess is seen at large HT and limits are presented on new physics: models which produce final states containing at least three jets and having cross sections larger than 1.6 fb with HT > 5.8 TeV are excluded. Limits are also given in terms of new physics models of strong gravity that hypothesize additional space-time dimensions
- …